Serving the Phoenix metro in Maricopa and Pinal counties Mon to Fri 7 AM to 6 PM · 24/7 emergency (480) 599-3378
Home / Services / Floor care
Hard floor maintenance

Commercial floor care in Phoenix

Hard floors take a beating from foot traffic, carts and the fine dust that tracks in from parking lots. Shipman Cleaning Co cleans, refinishes and protects VCT, tile, sealed concrete and stone floors across the Phoenix metro.

Industrial floor scrubber machine
Polished concrete floor in an empty commercial space
Overview

How we handle floor care

Good floor care is a cycle, not a single visit. Daily dust mopping and damp mopping remove grit before it scratches the finish. Regular burnishing restores shine on busy floors. When the top coats wear thin, a scrub and recoat adds fresh finish without a full strip. A full strip and refinish is the reset you need only when buildup or wear goes deeper. Matching the method to the floor saves money and extends the life of the finish.

We start by identifying each floor type, because VCT, ceramic tile, natural stone and sealed concrete need different chemicals and pads. Marble and travertine can etch from acidic cleaners, so we use pH-neutral products on stone. In Phoenix, sand and dust from parking lots act like sandpaper on floor finish, so entry mats and frequent dust mopping near doors matter. Large floors are cleaned with walk-behind or ride-on auto-scrubbers to save time and water.

Request a walkthrough
What's included

What the service covers

We agree on the list with you during the walkthrough and adjust it as your needs change.

VCT and resilient floors

  • Strip old finish and apply new coats
  • Scrub and recoat between full strips
  • High-speed burnishing to restore shine
  • Scuff and black mark removal
  • Edge and corner detail work
  • Maintenance plans with a set burnishing frequency

Tile, stone and concrete

  • Tile and grout deep cleaning
  • Grout sealing after cleaning
  • pH-neutral cleaning for marble, travertine and granite
  • Stone cleaning and sealing
  • Sealed concrete cleaning and resealing
  • Restroom floor detail cleaning around fixtures

Large floors and safety

  • Walk-behind and ride-on auto-scrubbing
  • Degreasing for kitchens and loading areas
  • Anti-slip treatment for entries, restrooms and kitchens
  • Entry dust control and mat recommendations
  • Wet floor signs and traffic control during work
  • After-hours and weekend scheduling
Who it is for

Facilities we do this for

  • Office buildings and lobbies
  • Medical and dental clinics
  • Schools and training centers
  • Retail stores and showrooms
  • Warehouses and distribution centers
  • Restaurants and commercial kitchens
  • Gyms and fitness centers
  • Apartment community clubhouses
Get a free quote
Reflective polished floor in an industrial space
How it works

From walkthrough to first clean

01

Floor assessment

We identify each floor type, check the condition of the finish and grout, and note traffic patterns and problem areas.

02

Plan and quote

We recommend a mix of routine and periodic work, such as regular burnishing and a yearly strip, and send a custom quote. Work is scheduled after hours or on weekends.

03

Refinish and check

Crews complete the work with signs and traffic control in place. We walk the finished floor with you and set the next service date.

Questions

Questions people ask

How often should VCT floors be stripped and waxed?

It depends on traffic and how well the floor is maintained between visits. Many commercial floors need a full strip once or twice a year, with scrub and recoats and regular burnishing in between. Good daily dust mopping stretches the time between strips.

How soon can people walk on a freshly finished floor?

Floor finish needs time to dry between coats and before traffic. Light foot traffic is usually fine after a few hours, but carts and furniture should wait longer. We schedule the work so the floor is ready when you open.

Can you clean marble and travertine?

Yes. Natural stone can etch from acidic or harsh cleaners, so we use pH-neutral products and stone-safe pads. We can also seal stone after cleaning to help it resist stains.

Does an anti-slip treatment change how the floor looks?

Most anti-slip treatments for tile and stone are designed to leave little visible change, but results vary by surface. We test a small area first so you can see the result before we treat the whole floor.

Can floor care be added to our regular cleaning?

Yes. Many clients add periodic floor care to their janitorial service so daily mopping and refinishing are planned together. Carpeted areas can be handled at the same time with carpet cleaning.

Need a cleaning partner for your facility?

Tell us about your building and schedule. We will set up a free walkthrough and send a custom quote.